Underwater
Connectors
(How to recognise various
underwater connectors from quite a long way away)
TTL Flash Connectors
 These connectors
must not be disconnected underwater. A waterproof blanking cap
is required if the connector is not in use. |
|
|
|
|
 |
Ikelite ICS5 connector
more info
(also used on ikelite pro-video light) |
 |
|
|
|
|
|
 |
Sea & Sea Duo strobe connector.
(on Sea & Sea and Inon flash units)
more info |
 |
|
Wet Connectors
These connectors can be unplugged and re-connected
underwater.
They provide manual flash triggering only (not TTL).
|
Electro-Oceanic
E-O
E/O
(also used for
video output) |
|
|
 |
Ikelite ICS2 (2-pin) Connector
(3rd pin is for reversal prevention only) |
 |
|
 |
Male Sealock (Nelson) Connector.
On end of cable from flash unit. |
 |
Female Sealock Connector.
To camera |
|
Impulse 6 pin connector
 |
© D.W.Knight, Cameras Underwater
2001 - 2004 |
